MJK Automation - Danfoss Range

Danfoss Variable Frequency Drives

Danfoss VLT® FC100 series HVAC Drive is dedicated to ventilation, heating, and air conditioning applications.

Danfoss VLT® FC200 series AQUA Drive has been designed specifically for water and wastewater applications. 

Danfoss VLT® FC300 series Automation Drive is dedicated to industrial automation applications.

VLT® Decentral Drive FCD 302 can be mounted close to the motor and offers a high degree of flexibility and functionality in demanding applications.

The VLT® Micro Drive is a general purpose drive that can control AC motors up to 22 kW. It’s a small drive with maximum strength and reliability.

The VLT® HVAC Basic Drive is a competitive drive for simple applications – with basic needs.

This is a mid-price drive that delivers ease of use and high flexibility in all industrial applications.

The VLT® OneGearDrive® is a highly efficient, permanent magnet, three-phase synchronous motor coupled with an optimized bevel gear box which improves plant productivity and reduces energy costs and spare parts.

VACON® 20 comes with compactness
and programming functionality that makes it one of the most easily adaptable drives available for OEM applications.

The VACON® 20 X decentralised drive offers all the benefits of decentralised solutions up to 7.5 kW.

The VACON® 100 INDUSTRIAL is a workhorse for a wide range of
industrial applications. It is easy
to integrate into all major control
systems and is easily adaptable
to different needs.

Robust enclosure and high functionality is provided by the VACON® 100X for indoor and outdoor applications.

For flexibility in cooling, with focus on customer-specific cooling solutions, the VACON® 20 Cold Plate is the perfect AC drive for OEMs with special cooling requirements.

The VACON® NXP Air Cooled drive is designed for a broad range of demanding industrial applications, focusing on higher power sizes and system drives.

The VACON® NXC combines the
VACON® NXP product range with a wide range of options in a single enclosed drive format.

Danfoss Harmonic Filters

The passive VLT® Advanced Harmonic Filter is specifically designed to match the Danfoss frequency converters with a facility to switch in /out the capacitors during stop periods. Optimised harmonic performance for VLT® frequency converters.

Danfoss Advanced Active Harmonic Filters compensate for 3 phase harmonic currents and improve the site power factor. the filter is manufactured with the same components as the well know VLT frequency converters.

Danfoss Output Filters

Sine-wave Filters reduce motor insulation stress and eliminate switching acoustic noise from the motor.

dU/dt filters reduce the dU/dt values on the motor terminal phase-to-phase voltage – an issue that is important for short motor cables.

VLT® Common Mode Filters MCC 105 core kit reduce electromagnetic interference and eliminate bearing damage by electrical discharge.

Danfoss Soft Starters

Danfoss VLT® MCD500 series Soft Starter is a total motor starting solution. Current Transformers measure motor current and provide feedback for controlled motor ramp and profiles.
  • All three phases are switched
  • Increased motor protection
  • Digital programmability
Danfoss VLT® MCD202 series Soft Starter has been designed to suit any application requiring smooth starting of a motor and basic motor protection whilst being a low costs solution with a small footprint.
  • Two phases are switched
  • Basic motor protection
Danfoss VLT® MCD201 series Soft Starter has been designed to suit any application requiring smooth starting of a motor but requiring low costs and a small footprint.
  • Two phases are switched
  • No motor protection
Danfoss VLT® MCD201 series Soft Starter has been designed to suit any application requiring smooth starting of a motor but requiring low costs and a small footprint.
  • Two phases are switched
  • No motor protection

Danfoss Analytical Measurement

Pressure switches (on-off) for industrial and marine applications pressure ranges from -1 to 400 bar.

Pressure transmitters for industrial and marine applications. Design in cartridge, block and box with measuring range up to 600 bar. 

Temperature switches (on-off) for industrial and marine applications from -60°C to 300°C. Degree of enclosure from IP33-67 in different designs, versions with marine, TÜV and ATEX approvals.

Temperature transmitters for industrial and marine applications with measuring range from -50°C to 800°C.

Thermostatic self-acting valves are a simple and reliable way to control the temperature of cooling equipment. Regulation ranges from 0-90°C and connections from G3/8 to 4” flange.