Hydrostatic Level Measurement

Hydrostatic Level SensorThe MJK Expert Hydrostatic level transmitters designed for drinking, waste and process water as well as chemicals in environments such as open tanks, wet-wells, boars and reservoirs.

Our level transmitters have a sturdy design with housing in re-enforced plastic or stainless steel. Cables are insulated with PUR, and steel reinforced to achieve very high tensile strength. Sensing membranes are made with either ceramic or stainless steel. Outputs are analog two-wire 4-20 mA, voltage or digital Modbus RTU.

 

 

 


Expert™ Hydrostatic Level transmitter 1400

Expert™ Level transmitter 1400 series with improved accuracy for both high and low measuring ranges.

The transmitters are approved for mounting in explosion hazardous areas. It has a capacitive measuring system and built-in breather tube for direct air pressure compensation.MJK Hydrostatic Level Sensor Expert 1400

Expert™ Level transmitter 1400 series has following features:

  • Application: Water Wells, Water Storage and Processing
  • AISI 316L Housing
  • Ceramic diaphragm
  • Ø 22mm outer diameter
  • Programmable zero point and span with flexible measuring ranges
  • Measuring ranges between 0 – 30 cm and 0 – 300m
  • Accuracy better than ± 0.1 % and stability 0.1 %/year
  • 2-wire 4 – 20 mA Output signal
  • PUR Cable
  • Ligthning surge resistance

Expert™ Hydrostatic Level transmitter 3400

Expert™ Hydrostatic Level transmitter 3400  with improved accuracy for both high and low measuring ranges.

The transmitters are approved for mounting in explosion hazard areas. It has a capacitive measuring system and built-in breather tube for direct air pressure compensation.MJK Expert 3400 Hydrostatic Level Sensor

Expert™ Level transmitter 3400 series has following features:

  • Application: Drinking, waste and process water, chemical resistant and can be used in tanks with chemicals such as a range of acids, bases and ferric chloride.
  • PPS plastics housing
  • Ceramic diaphragm, 99,9 % pure
  • Ø 50 mm outer diameter
  • Programble zero point and span with flexible measuring ranges.
  • Measuring ranges between 0 – 30 cm and 0 – 300m.
  • Improved accuracy better than ± 0.1 % and stability 0.1 %/year
  • 2-wire 4 – 20 mA Output signal
  • High pull strength (1000 kg) PUR Cable